• A hole is drilled in the end post or fence post for the wire.

• The Wirevise is then inserted into one end of the post hole.

• The wire is then inserted through the other end of the post hole through the Wirevise which automatically holds the wire by its unique patented jaw system.

• Tension is then applied by pulling the wire through the Wirevise using a claw hammer.

• Excess wire should be bent sideways or downward.

Retensioning

To increase the tension of the wire at any time, just pull the wire through the Wirevise using one of the tensioning tools mentioned above.

We carry the WireVise Anchor System.